Exploring the purity of chitin from crustacean sources using deep eutectic solvents: A machine learning approach.

OBJECTIVE: Chitin a natural polymer is abundant in several sources such as shells of crustaceans, mollusks, insects, and fungi. Several possible attempts have been made to recover chitin because of its importance in biomedical applications in various forms such as hydrogel, nanoparticles, nanosheets, nanowires, etc. Among them, deep eutectic solvents have gained much consideration because of their eco-friendly and recyclable nature. However, several factors need to be addressed to obtain a pure form of chitin with a high yield. The development of an innovative system for the production of quality chitin is of prime importance and is still challenging. METHODS: The present study intended to develop a novel and robust approach to investigate chitin purity from various crustacean shell wastes using deep eutectic solvents. This investigation will assist in envisaging the important influencing parameters to obtain a pure form of chitin via a machine learning approach. Different machine learning algorithms have been proposed to model chitin purity by considering the enormous experimental dataset retrieved from previously conducted experiments. Several input variables have been selected to assess chitin purity as the output variable. RESULTS: The statistical criteria of the proposed model have been critically investigated and it was observed that the results indicate XGBoost has the maximum predictive accuracy of 0.95 compared with other selected models. The RMSE and MAE values were also minimal in the XGBoost model. In addition, it revealed better input variables to obtain pure chitin with minimal processing time. CONCLUSION: This study validates that machine learning paves the way for complex problems with substantial datasets and can be an inexpensive and time-saving model for analyzing chitin purity from crustacean shells.

Biomineral crystallographic preferred orientation in Solenogastres molluscs (Aplacophora) is controlled by organic templating.

Aplacophoran molluscs are shell-less and have a worm-like body which is covered by biomineralized sclerites. We investigated sclerite crystallography and the sclerite mosaic of the Solenogastres species Dorymenia sarsii, Anamenia gorgonophila, and Simrothiella margaritacea with electron-backscattered-diffraction (EBSD), laser-confocal-microscopy and FE-SEM imaging. The soft tissue of the molluscs is covered by spicule-shaped, aragonitic sclerites. These are sub-parallel to the soft body of the organism. We find, for all three species, that individual sclerites are untwinned aragonite single crystals. For individual sclerites, aragonite c-axis is parallel to the morphological, long axis of the sclerite. Aragonite a- and b-axes are perpendicular to sclerite aragonite c-axis. For the scleritomes of the investigated species we find different sclerite and aragonite crystal arrangement patterns. For the A. gorgonophila scleritome, sclerite assembly is disordered such that sclerites with their morphological, long axis (always the aragonite c-axis) are pointing in many different directions, being, more or less, tangential to cuticle surface. For D. sarsii, the sclerite axes (equal to aragonite c-axes) show a stronger tendency to parallel arrangement, while for S. margaritacea, sclerite and aragonite organization is strongly structured into sequential rows of orthogonally alternating sclerite directions. The different arrangements are well reflected in the structured orientational distributions of aragonite a-, b-, c-axes across the EBSD-mapped parts of the scleritomes. We discuss that morphological and crystallographic preferred orientation (texture) is not generated by competitive growth selection (the crystals are not in contact), but is determined by templating on organic matter of the sclerite-secreting epithelial cells and associated papillae.

Structural and Functional Analysis of the Amorphous Calcium Carbonate-Binding Protein Paramyosin in the Shell of the Pearl Oyster, Pinctada fucata.

Amorphous calcium carbonate (ACC) is an important precursor phase for the formation of aragonite crystals in the shells of Pinctada fucata. To identify the ACC-binding protein in the inner aragonite layer of the shell, extracts from the shell were used in the ACC-binding experiments. Semiquantitative analyses using liquid chromatography-mass spectrometry revealed that paramyosin was strongly associated with ACC in the shell. We discovered that paramyosin, a major component of the adductor muscle, was included in the myostracum, which is the microstructure of the shell attached to the adductor muscle. Purified paramyosin accumulates calcium carbonate and induces the prism structure of aragonite crystals, which is related to the morphology of prism aragonite crystals in the myostracum. Nuclear magnetic resonance measurements revealed that the Glu-rich region was bound to ACC. Activity of the Glu-rich region was stronger than that of the Asp-rich region. These results suggest that paramyosin in the adductor muscle is involved in the formation of aragonite prisms in the myostracum.

Mussel shell-derived pro-regenerative scaffold with conductive porous multi-scale-patterned microenvironment for spinal cord injury repair.

It is well-established that multi-scale porous scaffolds can guide axonal growth and facilitate functional restoration after spinal cord injury (SCI). In this study, we developed a novel mussel shell-inspired conductive scaffold for SCI repair with ease of production, multi-scale porous structure, high flexibility, and excellent biocompatibility. By utilizing the reducing properties of polydopamine, non-conductive graphene oxide (GO) was converted into conductive reduced graphene oxide (rGO) and crosslinkedin situwithin the mussel shells.In vitroexperiments confirmed that this multi-scale porous Shell@PDA-GO could serve as structural cues for enhancing cell adhesion, differentiation, and maturation, as well as promoting the electrophysiological development of hippocampal neurons. After transplantation at the injury sites, the Shell@PDA-GO provided a pro-regenerative microenvironment, promoting endogenous neurogenesis, triggering neovascularization, and relieving glial fibrosis formation. Interestingly, the Shell@PDA-GO could induce the release of endogenous growth factors (NGF and NT-3), resulting in the complete regeneration of nerve fibers at 12 weeks. This work provides a feasible strategy for the exploration of conductive multi-scale patterned scaffold to repair SCI.

Differential fluorescence features and recovery speeds of different scorpion exoskeleton parts during the molting process.

Scorpion fluorescence under ultraviolet light is a well-known phenomenon, but its features under excitation in the UVA, UVB and UVC bands have not been characterized. Systematic fluorescence characterization revealed indistinguishable fluorescence spectra with a peak wavelength of 475 nm for whole exuviae from second-, third- and fifth-instar scorpions under different ultraviolet light ranges. In-depth investigations of the chelae, mesosoma, metasoma and telson of adult scorpions further indicated heterogeneity in the typical fluorescence spectrum within the visible light range and in the newly reported fluorescence spectrum with a peak wavelength of 320 nm within the ultraviolet light range, which both showed excitation wavelength-independent features. Dynamic fluorescence changes during the molting process of third-instar scorpions revealed the fluorescence heterogeneity-dependent recovery speed of scorpion exoskeletons. The typical fluorescence spectra of the molted chelae and telson rapidly recovered approximately 6 h after ecdysis under UVA light and approximately 36 h after ecdysis under UVB and UVC light. However, it took approximately 12 h and 24 h to obtain the typical fluorescence spectra of the molted metasoma and mesosoma, respectively, under UVA irradiation and 72 h to obtain the typical fluorescence spectra under UVB and UVC irradiation. The fluorescence heterogeneity-dependent fluorescence recovery of the scorpion exoskeleton was further confirmed by tissue section analysis of different segments from molting third-instar scorpions. These findings reveal novel scorpion fluorescence features and provide potential clues on the biological function of scorpion fluorescence.

Analysis of molecular structure and topological properties of chitosan isolated from crab shell and mushroom.

This investigation aimed to scrutinize the chemical and structural analogies between chitosan extracted from crab exoskeleton (High Molecular Weight Chitosan, HMWC) and chitosan obtained from mushrooms (Mushroom-derived Chitosan, MRC), and to assess their biological functionalities. The resulting hydrolysates from the hydrolysis of HMWC by chitosanase were categorized as chitosan oligosaccharides (csCOS), while those from MRC were denoted as mrCOS. The molecular weights (MW) of csCOS and mrCOS were determined using Matrix-Assisted Laser Desorption Ionization Time-of-Flight (MALDI-TOF) mass spectrometry. Furthermore, structural resemblances of csCOS and mrCOS were assessed utilizing X-ray powder diffraction (XRD) and Fourier transform infrared (FT-IR) spectroscopy. Intriguingly, no apparent structural disparity between csCOS and mrCOS was noted in terms of the glucosamine (GlcN) and N-acetylglucosamine (GlcNAc) composition ratios. Consequently, the enzymatic activities of chitosanase for HMWC and MRC exhibited remarkable similarity. A topological examination was performed between the enzyme and the substrate to deduce the alteration in MW of COSs following enzymatic hydrolysis. Moreover, the evaluation of antioxidant activity for each COS revealed insignificance in the structural disparity between HMWC and MRC. In summary, grounded on the chemical structural similarity of HMWC and MRC, we propose the potential substitution of HMWC with MRC, incorporating diverse biological functionalities.

Chemical extraction of chitin from American lobster (Homarus americanus) shells optimized through response surface methodology.

Chitin extraction from the shells of American lobsters (Homarus americanus) was optimized through the use of response surface methodology (RSM). The demineralization step was optimized to minimize the ash content of shell samples and the deproteination step was optimized to minimize the protein content of the chitin product. At a laboratory scale, one set of optimized conditions for the demineralization step was 7.35 % w/w acetic acid at a 40 mL/g of powdered lobster shell ratio for 15 min; this lowered the ash content from 39.62 % to 0.41 ± 0.08 %. A set of optimized conditions for the deproteination step at a similar scale was 4 % w/w sodium hydroxide at a 43 mL/g demineralized shell ratio heated to 95 °C for 83 min. These conditions were indicated to entirely remove protein from the resultant chitin. Average yields under optimized conditions were 23.43 ± 1.75 % for demineralization and 30.33 ± 0.02 % for deproteination, though a demineralization reaction with larger biomass input had a higher yield at 40.31 %.

The regulatory effect of NF-κB signaling pathway on biomineralization and shell regeneration in pearl oyster, Pinctada fucata.

Pinctada fucata is an important pearl production shellfish in aquaculture. The formation of shells and pearls is a hot research topic in biomineralization, and matrix proteins secreted by the mantle tissues play the key role in this process. However, upstream regulatory mechanisms of transcription factors on the matrix protein genes remain unclear. Previous studies have shown that NF-κB signaling pathway regulated biomineralization process through expression regulation of specific matrix proteins, including Nacrein, Prismalin-14 and MSI60. In this study, we systematically investigated the regulatory effect of the NF-κB signaling pathway key factor Pf-Rel and inhibitory protein poI-κB on the biomineralization and shell regeneration process. We applied RNA interference and antibody injection assays to study in vivo function of transcription factor Pf-Rel and characterized shell morphology changes using scanning electron microscopy and Raman spectroscopy. We found that transcription factor Pf-Rel plays a positive regulatory role in the growth regulation of the prismatic and nacreous layers, while the function of inhibitory protein poI-κB is to prevent excessive growth and accumulation of both layers. RNA-seq was conducted based on RNA interference animal model to identify potential regulatory genes by transcription factor Pf-Rel. Shell damage repair experiments were performed to simulate shell regeneration process, and observations of newly formed shells revealed that NF-κB signaling pathway had different functions at different times. This study provides us with a more macroscopic perspective based on transcription factors to investigate biomineralization and shell regeneration.

Calcitic Prisms of The Giant Seashell Pinna Nobilis Form Light Guide Arrays.

The shells of the Pinnidae family are based on a double layer of single-crystal-like calcitic prisms and inner aragonitic nacre, a structure known for its outstanding mechanical performance. However, on the posterior side, shells are missing the nacreous layer, which raises the question of whether there can be any functional role in giving up this mechanical performance. Here, it is demonstrated that the prismatic part of the Pinna nobilis shell exhibits unusual optical properties, whereby each prism acts as an individual optical fiber guiding the ambient light to the inner shell cavity by total internal reflection. This pixelated light channeling enhances both spatial resolution and contrast while reducing angular blurring, an apt combination for acute tracking of a moving object. These findings offer insights into the evolutionary aspects of light-sensing and imaging and demonstrate how an architectured optical system for efficient light-tracking can be based on birefringent ceramics.

Comparative physicochemical analysis of chitin quality of the two tagmata in the exoskeleton of the horseshoe crab Limulus polyphemus.

Recently, chitin biopolymer has received much attention as a wide variety of biomedical application for this and its derivatives have been reported, in fact, the study of non-conventional species as alternative sources of them compounds has taken particular interest. Here, we present a comparative physicochemical survey of the two tagmata in the exoskeleton of the horseshoe crab Limulus polyphemus: the prosoma and the opisthosoma, collected in Yucatán, Mexico. The characterization included CHNSO analysis, FTIR, TGA, DSC, XRD, and SEM. The CHNSO analysis revealed that C is present in the highest proportion (∼45 %) and that chemical composition did not show significant differences (P < 0.05) between the two tagmata. FTIR spectra of two tagmata presented a wide characteristic band of the chitin between 3600 and 3000 cm-1, confirming the presence of this biopolymer in the exoskeleton studied. TGA and DTGA profiles resulted very similar for both tagmata being the residual mass at 650 °C of around 30 % for both samples; these values were associated to the presence of minerals. SEM micrographs showed a porous matrix with infinite large number of irregularly shaped particles. Results show that both tagmata are made up of chitin, and they seem to have a high mineral content.

Removal of Fluoride from Aqueous Solution Using Shrimp Shell Residue as a Biosorbent after Astaxanthin Recovery.

Natural astaxanthin has been widely used in the food, cosmetic, and medicine industries due to its exceptional biological activity. Shrimp shell is one of the primary natural biological sources of astaxanthin. However, after astaxanthin recovery, there is still a lot of chitin contained in the residues. In this study, the residue from shrimp (Penaeus vannamei) shells after astaxanthin extraction using ionic liquid (IL) 1-ethyl-3-methyl-imidazolium acetate ([Emim]Ac) was used as a bioadsorbent to remove fluoride from the aqueous solution. The results show the IL extraction conditions, including the solid/liquid ratio, temperature, time, and particle size, all played important roles in the removal of fluoride by the shrimp shell residue. The shrimp shells treated using [Emim]Ac at 100 °C for 2 h exhibited an obvious porous structure, and the porosity showed a positive linear correlation with defluorination (DF, %). Moreover, the adsorption process of fluoride was nonspontaneous and endothermic, which fits well with both the pseudo-second-order and Langmuir models. The maximum adsorption capacity calculated according to the Langmuir model is 3.29 mg/g, which is better than most bioadsorbents. This study provides a low-cost and efficient method for the preparation of adsorbents from shrimp processing waste to remove fluoride from wastewater.

A Pilot Study of Mercury Distribution in the Carapace of Four Species of Sea Turtles from Northeastern Brazil.

Scutes present very complex morphologies with different growth rates at different areas of the carapace that can change the accumulation process of essential and non-essential metals. To infer the effects of morphology and growth on Hg concentrations in scutes, we mapped them in the carapace of one individual of four species of sea turtles sampled along the Brazilian coast. The results showed that Hg concentrations were higher in the vertebral scutes of Chelonia mydas and Eretmochelys imbricata suggesting variation in growth rates of different carapace areas since the vertebral area is the first to develop prior to costal areas. Caretta caretta and Lepidochelys olivacea did not show differences between carapace areas. The preliminary data from this pilot study indicate that vertebral scutes may be suitable for monitoring Hg in C. mydas and E. imbricata, since they reflect longer exposure period. A species-to-species comparison of Hg concentrations is not possible due to the small number of sampled individuals, nevertheless, E. imbricata showed remarkably lower Hg concentrations compared to the other three species. Further studies are required for all four species, with a larger number of individuals, preferentially of varying life stages, due to the unknown effects of different diets, Hg exposure, and migration histories.

A Molecular-Scale Understanding of Misorientation Toughening in Corals and Seashells.

Biominerals are organic-mineral composites formed by living organisms. They are the hardest and toughest tissues in those organisms, are often polycrystalline, and their mesostructure (which includes nano- and microscale crystallite size, shape, arrangement, and orientation) can vary dramatically. Marine biominerals may be aragonite, vaterite, or calcite, all calcium carbonate (CaCO3 ) polymorphs, differing in crystal structure. Unexpectedly, diverse CaCO3 biominerals such as coral skeletons and nacre share a similar characteristic: Adjacent crystals are slightly misoriented. This observation is documented quantitatively at the micro- and nanoscales, using polarization-dependent imaging contrast mapping (PIC mapping), and the slight misorientations are consistently between 1° and 40°. Nanoindentation shows that both polycrystalline biominerals and abiotic synthetic spherulites are tougher than single-crystalline geologic aragonite. Molecular dynamics (MD) simulations of bicrystals at the molecular scale reveal that aragonite, vaterite, and calcite exhibit toughness maxima when the bicrystals are misoriented by 10°, 20°, and 30°, respectively, demonstrating that slight misorientation alone can increase fracture toughness. Slight-misorientation-toughening can be harnessed for synthesis of bioinspired materials that only require one material, are not limited to specific top-down architecture, and are easily achieved by self-assembly of organic molecules (e.g., aspirin, chocolate), polymers, metals, and ceramics well beyond biominerals.

Ocean acidification, warming and feeding impacts on biomineralization pathways and shell material properties of Magallana gigas and Mytilus spp.

Molluscs are among the organisms affected by ocean acidification (OA), relying on carbon for shell biomineralization. Metabolic and environmental sourcing are two pathways potentially affected by OA, but the circumstances and patterns by which they are altered are poorly understood. From previous studies, mollusc shells grown under OA appear smaller in size, brittle and thinner, suggesting an important alteration in carbon sequestration. However, supplementary feeding experiments have shown promising results in offsetting the negative consequences of OA on shell growth. Our study compared carbon uptake by δ13C tracing and deposition into mantle tissue and shell layers in Magallana gigas and Mytilus species, two economically valuable and common species. After subjecting the species to 7.7 pH, +2 °C seawater, and enhanced feeding, both species maintain shell growth and metabolic pathways under OA without benefitting from extra feeding, thus, showing effective acclimation to rapid and short-term environmental change. Mytilus spp. increases metabolic carbon into the calcite and environmental sourcing of carbon into the shell aragonite in low pH and high temperature conditions. Low pH affects M. gigas mantle nitrogen isotopes maintaining growth. Calcite biomineralization pathway differs between the two species and suggests species-specific response to OA.

Directional fabrication and dissolution of larval and juvenile oyster shells under ocean acidification.

Biomineralization is one of the key biochemical processes in calcifying bivalve species such as oysters that is affected by ocean acidification (OA). Larval life stages of oysters are made of aragonite crystals whereas the adults are made of calcite and/or aragonite. Though both calcite and aragonite are crystal polymorphs of calcium carbonate, they have different mechanical properties and hence it is important to study the micro and nano structure of different life stages of oyster shells under OA to understand the mechanisms by which OA affects biomineralization ontogeny. Here, we have studied the larval and juvenile life stages of an economically and ecologically important estuarine oyster species, Crassostrea hongkongensis, under OA with focus over shell fabrication under OA (pHNBS 7.4). We also look at the effect of parental exposure to OA on larvae and juvenile microstructure. The micro and nanostructure characterization reveals directional fabrication of oyster shells, with more organized structure as biomineralization progresses. Under OA, both the larval and juvenile stages show directional dissolution, i.e. the earlier formed shell layers undergo dissolution at first, owing to longer exposure time. Despite dissolution, the micro and nanostructure of the shell remains unaffected under OA, irrespective of parental exposure history.

Interfacial Mechanical Behavior in Nacre of Red Abalone and Other Shells: A Review.

Interfaces between nacreous tablets are crucial to the outstanding mechanical properties of nacre in natural shells. Excellent research has been conducted to probe the effect of interfaces on strength and toughness of nacre, providing critical guidelines for the design of human-made laminated composites. This article reviews recent studies on interfacial mechanical behavior of nacre in red abalone and other shells, including experimental methods, analytical and numerical modeling. The discussions focus on the mechanical properties of dry and hydrated nacreous microstructures. The review concludes with discussions on representative studies of nacre-like composites with interfaces tuned using multiple approaches, and provides an outlook on improving the performance of composites with better interfacial controls.

Chemical contamination in coastal areas alters shape, resistance and composition of carnivorous gastropod shells.

Morphological, structural and compositional alterations in shells of molluscs have been proposed as putative biomarkers of chemical contamination in coastal zones. Despite this, few studies were carried out using top predator gastropods which tend to be more susceptible to contamination exposure. Thus, the present study assessed disturbances on shells of Stramonita brasiliensis considering compression resistance and organic and mineralogical matrix composition, related to morphometric alterations. Results showed reductions in compression resistance and organic matrix content associated with higher contaminated sites. In addition, a predominance of calcite polymorphs was seen in shells obtained in polluted areas. Such outputs were consistent with local contamination levels which may have induced the observed alterations. Thus, changes in mollusc shells showed good performance as potential biomarkers of coastal contamination, being probably observed in other species of carnivorous gastropods around the world.

Elevated temperature and carbon dioxide levels alter growth rates and shell composition in the fluted giant clam, Tridacna squamosa.

Giant clams produce massive calcified shells with important biological (e.g., defensive) and ecological (e.g., habitat-forming) properties. Whereas elevated seawater temperature is known to alter giant clam shell structure, no study has examined the effects of a simultaneous increase in seawater temperature and partial pressure of carbon dioxide (pCO2) on shell mineralogical composition in these species. We investigated the effects of 60-days exposure to end-of-the-century projections for seawater temperature (+ 3 °C) and pCO2 (+ 500 µatm) on growth, mineralogy, and organic content of shells and scutes in juvenile Tridacna squamosa giant clams. Elevated temperature had no effect on growth rates or organic content, but did increase shell [24Mg]/[40Ca] as well as [40Ca] in newly-formed scutes. Elevated pCO2 increased shell growth and whole animal mass gain. In addition, we report the first evidence of an effect of elevated pCO2 on element/Ca ratios in giant clam shells, with significantly increased [137Ba]/[40Ca] in newly-formed shells. Simultaneous exposure to both drivers greatly increased inter-individual variation in mineral concentrations and resulted in reduced shell N-content which may signal the onset of physiological stress. Overall, our results indicate a greater influence of pCO2 on shell mineralogy in giant clams than previously recognized.

Fluoride removal from aqueous solution via environmentally friendly adsorbent derived from seashell.

Nowadays, the presence of excessive ions in water resources is of utmost concern and has attracted increasing attention; therefore, excessive amounts of these ions such as fluoride should be removed from drinking water. Conventional water treatment processes are shown to be incapable of the complete removal of redundant fluoride from aqueous water bodies, whereas adsorption is a promising, effective, cost-benefit, and simple method for this purpose. This study aimed to synthesize effective adsorbents from bivalve shells and evaluate the adsorption function of bivalve shells in removing fluoride from aqueous solutions. In this study, the oyster shell was collected from the Persian Gulf's seaside and were crushed by manual mortar and blender, and graded with standard sieves with 70 mesh size. The prepared bivalve shell was characterized by SEM and FTIR. To investigate and optimize various variables on fluoride removal percentage a response surface methodology based on central composite design (RSM-CCD) was used. Under optimal conditions (pH: 5.5, adsorbent dose: 0.3 g/L, contact time: 85 min and fluoride concentration: 3 mg/L) the maximum removal efficiency was 97.26%. Results showed that the adsorption equilibrium and kinetic data were matched with the isotherm Langmuir Model (R2 = 0.98) with qmax = 27.31 mg/g and pseudo-second-order reaction (R2 = 0.99). Also, a thermodynamic study exhibited that the adsorption process of fluoride into bivalve shells was an exothermic reaction and could not be a spontaneous adsorption process. Based on the results, the bivalve shell was found as an appropriate adsorbent to remove fluoride from aqueous solutions.

Positive effects and mechanism of ultrasound on chitin preparation from shrimp shells by co-fermentation.

The objective of this study is to explore the effect and mechanism of ultrasound on chitin extraction from shrimp shells powder (SSP) by the co-fermentation of Bacillus subtilis and Acetobacter pasteurianus. After pre-treating the SSP with high-intensity ultrasound (HIU) at 800 W, the protease activity in the fermentation solution reached 96.9 U/mL on day 3, which was significantly higher than for SSP that had not been pre-treated with ultrasound (81.8 U/mL). The fermentation time of the chitin extraction process was 5.0 d without ultrasound pre-treatment, while it was shortened to 4.5 d when using ultrasound at 800 W to treat SSP. However, there were no obvious differences when we applied ultrasound at low power (200 W, 400 W). Furthermore, chitin purified from shrimp shells pre-treated with HIU at 800 W exhibited lower molecular weight (11.2 kDa), higher chitin purity (89.8%), and a higher degree of deacetylation (21.1%) compared to SSP with no ultrasound pre-treatment (13.5 kDa, 86.6%, 18.5%). Results indicate that HIU peels off the protein/CaCO3 matrix that covers the SSP surface. About 9.1% of protein and 4.7% of Ca2+ were released from SSP pre-treated with HIU at 800 W. These figures were both higher than with no ultrasound pre-treatment (4.5%, 3.2%). Additionally, the amount of soluble protein extracted from SSP through HIU at 800 W was 50% higher than for the control sample. SDS-PAGE analysis indicated that the soluble protein was degraded to the micromolecule. It also revealed that HIU (600, 800 W) induced the secondary and tertiary structure destruction of protein extracted from SSP. In conclusion, HIU-induced degradation and structural damage of protein enhances the protein/CaCO3 matrix to be peeled off from SSP. Also, in the co-fermentation process, an increase of protease activity further accelerates deproteinization.